Transparent Epoxy Resin Potting Glue 2 Parts Silicone Potting Glue
Compound 2:1 Low Viscosity For Resistors Sensors Temperature
Controllers High Hardness Epoxy Potting Material
Product model
HN-5508 epoxy resin at room temperature or low temperature, with low viscosity, long
operation time, good fluidity, and easy penetration into the
clearance of the product
Product feature
It has flame retardant insulation, sealing bonding, moisture-proof
earthquake resistance, temperature resistance
Product application
HN-5508 is widely used in transformers, resistors, filters,
temperature sensors, temperature controllers, ignition coils, high
voltage packs
| uring | builder | Epoxy resin 5508 | Curing agent 5508 |
| pigment | Black / White et al | Ruburn / transparent surface |
| A sticky epoxy resin water | r liquid specific |
| c gravity, g / cm3 | 1.4-1.5 | 1.05 |
| Viscosity of 25℃ | 4,500—6,000cp s | 150—250cp storage |
| e Period (25℃) | Six months | x months |
processabili
| mixing ratio | A: B =5:1 (weight ratio) |
| Available for a time of 25℃ | 2-3H (100g mix) |
| curing time | 25℃ / 6-8H surface stem, 12-16H fully cured or 60-80℃/1.5-2H |
| After curing | 2 Tensile strength of kg/cm | 16-18 |
| 2 Compressive strength of kg/cm | 18-22 |
| Resistance to the voltage of kv/mm | 20-22 |
| Surface resistance ofΩ-cm | 14 1.2*10 |
| Volume resistance ofΩ-cm | 15 1.1*10 |
| contraction percentage% | 0.35-0.55 |
| Water absorption rate was 25℃ * 24H | <0.03% |
| The hardness of SHORE A | 85-95 |
distortion temperature ℃ | 130-150 |
| low temperature resistant ℃ | -30 |
Matters need attention:
1. This product is an AB agent, according to the label ratio on the
product package, and the mixing ratio is weight ratio and
non-volume ratio.
2, AB agent mixing can not be stirred with a round bar without
resistance, must be stirred with a flat tool with resistance, it is
best to use a small mixer.
3. This product should be placed in a cool and dry place to avoid
light, keep the workshop dust-free, and cover the unused glue after
opening the lid in time.
4. The performance test data is the test result when the humidity
is 60% and the temperature is 25℃, for customer reference only.
5, resin glue stored in a wet environment will exhibit a
crystallization phenomenon, please put it in the oven at a low
temperature hot dry, and restore its original state.
